Is it possible to remove the shellac lacquer at home. How to remove shellac with liquid, without liquid, foil, without foil, apparatus

Gel varnish coating is a practical way to maintain an attractive appearance of nails over several weeks. Also, this procedure is often called Shellac in honor of the popular brand producing high-quality products for manicure gel varnishes.

If, for applying gel varnish, the use of special devices and means is necessary, then remove the shellac from the nail at home. There are several ways to remove gel varnish, sometimes you can do without specializable compositions and tools.

How to remove shellac at home

Ways to remove gel varnish with nails:

• Chemical. It is performed using remover for coating. This includes wigging and use of styer - an electro-band machine, with which you can remove the shellac with a special tool transformed into pairs.
• Mechanical. Includes the hardware removal of the coating and the spill of the gel varnish manually. The proper removal of the shellac with a mill is considered the most gentle for nail option.

How to independently remove the shellac by scattering

Ideally, a liquid specially designed for this is used, but for the latter, the shellac acetone can be removed.

Materials needed to wipe the shellac

• Pilling abrasiveness 180-240 Grit. It will be necessary to remove the top layer of the shellac. It is not necessary to do this, but otherwise the gel varnish will take more time.
• Polishing block.
• Manicure brush.
• Remurover and impregnation material: cotton spongats, lint-free napkins, cotton wool. Can be replaced with special napkins.
• Orange wand / Pusher.
• Foil / clamps / caps for fingers.
• Manicure oil.
• Capacity for Remurver.

How to remove Shellac with foil and special liquid

• Spil up the top fold, we remove the dust formed on the nails with a brush.
• Cut the lint-free napkin / cotton discs to pieces whose value is determined based on the size of the nail. Cat disk can be pre-burst into 2 parts. Is it possible to remove the shellac using wool? It is possible, but its pieces should not be thick, otherwise the rehemor will not be exhibited, but the quality of the coating will not improve.
• We make a rehemver material for soaking, we apply it to the nails.
• Tightly wrap the top phalange of the fingers of the foil, it is desirable that its glossy side is turned inside.

• Specified in the instructions for the remover of the time interval (usually 10-20 minutes), alternately by massaging circular motions, remove the resulting "compresses" from the fingers.
• We remove the coating with a flush or a stick with neat movements towards the nail root to its tip.
• Watering nails with bug.
• If further manipulations with nails are not planned, then my hands are applied on the cuticle oil.

How to remove the shellac without a special fluid

• A special solution can be replaced by acetone-containing lacquer to remove.
• The principle of removal of the coating is the same as when using a track, however, it can take more time to detect gel varnish.

How to remove shellac without foil

• The foil is replaced with tightly adjacent medical gloves. If the gel varnish is planned to be removed regularly, it is reasonable to acquire special reusable caps or clamps.
• An alternative to the personally created "compresses" with Remurver serves special napkins for removing gel varnish with nails. They are small sachets, inside of which the material is impregnated with a rehemor. To remove the shellac, the sachet is put on a finger so that the nail tightly in contact with the napkin. After the edge, the bag is wrapped around the finger and fixed with a sticky ribbon. After the one specified by the time-specified sachet with a napkin remove and continue the removal of the coating according to the soapying method.

• Remove Shellac at home liquid can also be soaked for 10-15 minutes of the upper phalanx of the fingers in a small container with a rehemver. However, this method is not recommended due to lower efficiency and aggressive impact of the composition on the skin of the fingers. Those who wish to try out this method of removing the coating must be pre-apply to the thick layer of the nutritional cream immersed into the solution.

How to remove shellac at home with styer

Materials needed to work with stimples:

• Pilling abrasiveness 180-240 Grit.
• Polishing block.
• Brush for manicure.
• Styer.
• Remumber.
• Pusher / Orange wand.
• Manicure oil.

How to remove Shellac with a special liquid with a standard:

• First of all it is worth the device. To do this, 5 ml of special fluid is poured into the flask to remove the gel coating from the nail.
• Next, you need to remove the top layer of the Shellac, during this time the stiment will just prepare for work.
• We remove the dust with a brush and lower your fingers into special holes on the device. The process of softening the old coating lasts approximately 10 minutes.

• After this time, the shellac is easily removed by a flusher or a wand.
• Next, the nail is polished.
• At the end you need to wash your hands and apply manicure oil on the cuticle.

How to remove the shellac with spilling

Spilization can be done with a milling mill or manually using highly abrasive pylons. The hardware method is popular with the averages, as it allows you to quickly remove the shellac without harm to the nails.

Materials needed to remove shellac with a spill method:

• Polishing block.
• Pink abrasiveness 100-150 Grit / milling mill with ceramic or carbide milling cutter.
• Brush.
• Mask.
• Manicure oil.

How to remove Shellac with a device:

• When the gel varnish is spilled, a lot of dust is formed, so it is strongly recommended to wear a mask to protect the respiratory tract before making a shellac.
• For hardware spill, the coating is better to use a ceramic milling mill, but carbide is suitable.
• At first, it is better to work on medium-sized turns, after stinging hands - at high.
• Delete Shellac stands with light fast movements from the nail root to the free edge.
• To remove most of the coating, the nozzle end is used, the tip should work only in hard-to-reach places.
• In order to avoid traumatization of the nail plate, the base with the bullet is not recommended.
• After removal of the color coating, the nail is polished with saws or bug.
• Next, the hands are thoroughly clean, after the cuticle is lubricated with oil.

How to remove shellac with nails with saws

• The method takes out quite a lot of time and strength. When spilling, the shellaus is manually used on a sufficient major grain: 100-150 Grit abrasiveness.
• After removing the color coating, the nail is processed by the BAF.
• Final stage: washing hands and use of cuticle care oil.

How to remove shellac video

Below you can familiarize yourself with the video in which it is described in detail in detail and is shown how to remove the shellac lacquer to the above methods.

Output

The use of foil and acetone-containing means for removing varnish or spill with a coarse-grained sawmill with subsequent polishing is something that can be removed by Shellac at home with minimal material costs.

For regular removal of gel varnish at home, it is better to get a high-quality milling mill, because it is very removed by Shellac with this device quickly and conveniently, and the method itself is the least trauma for the nail plate.