How beautiful to pack the flowers with your own hands. How to pack a bouquet of flowers in paper, film, grid, box. Step-by-step instructions, how to pack the flowers in the pot

Packaging plays an important role in the perception of the flower arrangement. Then we will discuss the recommendations that it is worth considering when the colors and about 11 ways to pack a bouquet.

How to pack colors correctly: Tips

• Packaging should attach a bouquet completed, to hide disadvantages and emphasize the dignity, but in no case do not draw attention to yourself. Abundant decor, screaming paints can cross all the efforts aimed at creating a flower arrangement.
• The most relevant packaging from kraft paper, transparent tracing, felt, cargoes. But foil and coupling structures from corrugated paper are better not to use.
• Packaging materials should be harmonized between themselves in color, texture.
• The rule that says is that the packaging is needed for transporting the bouquet and must be removed before putting flowers in the vase, somewhat outdated.

How to pack colors in the film

Basic packaging of colors in the film

Would need:

• square sheet of color film;
• ribbon.

How to pack live flowers in the film:

1. Put on a solid, smooth surface.
2. Bouquet put on a film diagonally.
3. To form a "horn" by alternately turning the corners to a bouquet.
4. Fix the packaging in such a tape position.

How to pack flowers in kraft paper

Simple packaging of colors in kraft paper

Would need:

• 2 rectangular craft-paper sheets;
• stapler and brackets;
• ribbon.

Package:

• A sheet of paper folded along the long side of a bit of the neglection.

• Make 2 cuts on the fold line.

• Similar manipulations to implement with the second sheet.

• Alternately wrap a bouquet of packaging elements.

• Play packaging, copold its top parts with a stapler.

• Below to secure the packaging of the satin ribbon.

Use kraft paper in order to pack colors. The video published below will demonstrate 4 different uncomplicated methods.

Packaging of colors from kraft paper and vinyl

Would need:

• 2 craft-paper sheet 50 × 50 cm;
• 1 sheet of vinyl size 45 × 45 cm; Vinyl sheet of 22.5 × 45 cm in size - optional;
• narrow transparent tape;
• stapler with brackets;
• two-way scotch / adhesive gun and a rod to him - at will.

Packing Production:

• A sheet of paper arrange a rhombus on a solid and smooth surface.
• On paper, put the square cut vinyl in such a way that the centers of figures are at one point, and the distance between the sides of the squares was approximately the same.
• Locate a bouquet on the future substrate, the inflorescences must be slightly above the figure of the figure.

• Wrap the sides of the lower half of the rhombus on the bouquet, fix the substrate in such a form of scotch.

• Take the craft-paper sheet, roll it as shown in the photo, work the fold line.

• Cover the front side of the bouquet with the resulting element so that two central angle "watched" up. Side sides of the element wrap around a bouquet, fix the package using a stapler.

• At this stage you can stay.
• Those who wish to give packing a bouquet more elegant and unusual look needed to glue around the perimeter an involnee side of the vinyl rectangle double-sided scotch and attach the decor to the front side of the bouquet.

• Packaging from kraft paper and vinyl ready.

How to pack flowers in designer paper

Packaging for a spiral bouquet, how to pack a bedroom flower

Would need:

• gift paper;
• twine or tape;
• scissors.

How to quickly pack the flower in a pot or a bouquet:

• Rectangular Cut paper Locate on a flat and solid surface face down.
• In the center of the rectangle put a flower pot or leg of a bouquet.
• Wrap a pot or leg of a bouquet paper, fix with a twine or ribbon.

Cone for packing a bouquet of flowers

Would need:

• designer paper;
• gel second glue / adhesive gun and rods to it;
• hole puncher;
• scissors;
• satin ribbon;
• decor - optional.

How to pack the flower as a gift in the cone:

• Close from paper a truncated cone, fix it with glue.
• With the help of scissors, align the top of the "Horn".
• To create a handle to do 4 holes with a hole, turn 2 ribbons in them, fix the edges of the ribbon nodules.
• On request, decorate the crookes.
• Place flowers in packaging.

How to pack the flowers in the box

Packing Cascading Bouquet Flowers Box

Would need:

• cardboard box with lid. Dimensions of the box are determined by the size of the bouquet;
• satin ribbon;
• gift paper;
• leske with beads of several diameters - if desired;
• scissors.

Package:

• Bouquet's leg decorate a neat atlas bows.
• Fit the bottom of the gift paper box.
• Place a bouquet in the box.
• Decorate a bouquet of beads on a fishing line.

• Cover the box with a lid, tower a satin ribbon, decorate a bow.

How to pack the flowers in a hat

Compositions in hat boxes look stylish, do not need a vase. To extend the life of the colors, they can be carefully watered.

Would need:

• hat box. The size is determined by the number of colors in the composition;
• floristic foam (oasis);
• floral knife;
• film;
• water container;
• secator;
• ribbons, stickers, bilateral scotch - optional.

Packing Flowers: Master Class on the Creation of Hat Box:

• From the formation of a floristic foam with a floristic knife cut the cylinder of the required diameter. As a template, it is convenient to use the lid from the box.
• The cylinder from the floristic foam is put in water container. The item will gradually be filled with water and will immerse itself on the bottom of the tank. Put pressure, it is impossible to compress the floral foam.
• Cut the square of the film of this size so that they can be fastened the bottom and walls of the hat box.
• Place in the center of the square from the film Floral foam, carefully transfer the film with foam to the box.
• Place the film, carefully cut off the excess edges with scissors.
• Determine the length of the stems, based on the height of the box, the height of the floristic foam and the level on which the colors head will be located. The required length of the stem is convenient to measure, applying the flower to the box with inflorescence down. Crop the stems need to be a secateur at an angle of 45 degrees.
• Collect a floral composition.
• Optionally, decorate a box with a ribbon or sticker.
• If the colors heads are located above the edges of the box and cover it, it is not possible, you can put a box in the lid. So that when transporting the cover does not slip, it is attached to the bottom of the box in small pieces of two-way tape.

Hat Box: Photo of Packed Flowers:

By the same principle you can fill the box in the form of a rectangular parallelepiped.

Packing roses in an acrylic box

Would need:

• colorless acrylic box;
• roses;
• secator;
• water;
• napkin;
• decor - optional.

How to step by step to pack the flowers in the box of acrylic:

• Pour a box of several centimeters of water.
• Wipe the walls of the box with a napkin to remove water droplets.
• Roses remove spikes, casting, sewers, the first row of petals.

• Determine the desired length of the stems, relying on what the height of the box and how much the flower head will play for its edges. Cut off the secret with an excessive angle.

• Gently place roses in the box so that the stems are perpendicular to the bottom.

• Optionally, decorate the box.

How to pack the flowers in the grid

Simple packing from a grid for a cascade bouquet of flowers

Would need:

• rectangular cutting mesh;
• scissors;
• ribbon.

Package:

• In the center of the laying on the table cutting a mesh place a bouquet, straighten up flowers.

• Fold the package at the bouquet connection site, fix the technical ribbon, decorate with a decorative ribbon.

How to pack a spiral bouquet of colors in the grid

Would need:

• roll mesh;
• scissors;
• stapler and brackets;
• decorative tape.

Package:

1. Lightly unwind the roll with the grid, take the edge of the canvas behind the top corner, bend it so that it turns out a two-layer rectangular triangle, fix the angle of the stapler.
2. Make a similar manipulation on the other side to make an equifiable triangle.
3. Cut the mesh from the roll, leaving the stock of about 15 centimeters to decorate the legs of the bouquet.
4. Put a bouquet on the workpiece so that the colors heads are slightly above the middle of the left triangle hypotenuse, and the stalks were lying near the direct angle.
5. Wrap the bouquet of the right side of the workpiece, fix the packaging with a ribbon.
6. Collapse sticking tips of packaging with tubes, fix them with a stapler.

How to pack colors in corrugated paper

Would need:

• corrugated paper;
• ribbon;
• decor - optional.

Package:

• Dispatch paper on a solid and smooth surface. For the packaging of a small bouquet, a paper cut is 100 × 50 cm.
• Top paper edge inside. The output width should be the same over the entire length and approximately 15 cm.
• Locate a bouquet on paper so that the colors heads slightly towered over the edge of the future packaging.

• Wrap paper bouquet, fix the packaging with a ribbon.

• If desired, the packaging can be decorated.

Output

Nowadays, it is beautifully to pack the flowers not only to hide small flaws and protection of a bouquet during transportation, but also for underscores the individuality and holistic perception of the composition.

Thanks to the above-described simple master classes, it will be able to pack the flowers with your own hands with your own hands, it's worth practicing a little bit.