What to do if the toilet is clogged. How to clean the toilet at home

Zaror toilet is not pleasant the problem. Unfortunately, all plumbing devices from time to time undergo such a nuisance, especially if care for them wants to leave the best. The cause of the blockage can be a variety of clusters: urea, fat, plaque from hard water. If you are faced with such a nuisance, you should not immediately call the plumbing, you can try to cope with the suction yourself. There are several ways and special tools for this. In our article, you will find information about what to do if the toilet is clogged.

Can a toilet clog: signs of a blockage

Problems with sewage can occur due to various reasons. At the same time, unpleasant signs of blockage appear, which are visible to the naked eye:

• unpleasant smell from the sewer system in the toilet;
• slow water care during draining;
• the appearance of water in the sink, bathroom or shower cabin while washing off the toilet;
• the appearance of feces in the toilet, as well as water from the riser.

If you notice at least one of these signs, you know, you have a sewer clogged.

Now you need to check how local the problem is. The thing is that in modern multi -storey buildings the sewer system is adjacent. Accordingly, the blockage may not form with you, but in the general riser. Checking it is quite simple. Observe water in the sink, bathroom or shower. If the water leaves slowly or not the water level and does not decrease at all, then the riser is clogged. In this case, it will not work out to clean the system yourself, but only a qualified plumbing man will cope with this task.

Why the toilet clogs

The toilet can be salted for a variety of reasons. At the same time, your inaccurate or improper operation of the plumbing agent was not always the cause of the blockage. Believe me, sometimes even with regular blockage prevention, this nuisance happens, it simply delays in time.

Causes Zasor:

• incorrect use of the sewage system. I mean, washing into the toilet of a large amount of paper, cat filler, food residues, etc. Also often in the toilet, hair clubs, rags, and sometimes even toys fall into the toilet. Incorrect operation of this equipment will necessarily “come around”, so we recommend using the toilet only for its intended purpose;
• lime accumulations in the drain pipe. Water flowing from the tap most often has increased rigidity. Over the years, a lime plaque accumulates on the walls of the toilet, which grows in a dense layer. There are cases when, when disassembling the toilet, it is determined that the “thicket” pipe is almost completely and for washing residues there is only a minimum hole. You do not need to be a specialist to understand that the smaller the circle for drain, the easier it is to pollute to it;
• incorrect installation of the toilet. This is one of the most common reasons for a clogging of the toilet. The thing is that when installing a plumbing agent, the correct angle of inclination of the toilet pipe to the riser, as well as the recommended distance between them, is not always observed. As a result, feces and other residues washed into the toilet can linger in the pipe and not fall into the overall sewer system;
• lack of a fan pipe or valvesaligning the pressure of water during draining;
• incorrect toilet design. Unfortunately, not all manufacturers conscientiously adhere to the norms for the manufacture of this plumbing device. As a result, the irregular structure of the toilet leads to the formation of blockages in the water -bearing device.

The toilet was clogged: how to clean the toilet at home

Agree, it’s hard to imagine a cozy house without a regularly working plumbing. Zaror toilet is not only aesthetic, but also practical. Therefore, it is necessary to solve it quickly and timely.

You can solve the problem of a plumbing device in several ways. Among them:

• chemical;
• mechanical;
• hydraulic;
• pneumatic.

How to clean the toilet from blockage: chemical method

The chemical method of cleaning pipes is the easiest. It consists in the use of special purchased products that corrode accumulations (lime plaque, hair, food remains, fat, salt, etc.) inside the drain system.

The most popular are the following funds:

• Mole;
• Flup;
• Anti -blocking;
• Sanfore;
• Domestos;
• Toilet duckling;
• Tire.

These products should be used with caution - the complex chemical composition can corrode the skin. Therefore, you need to use funds exclusively in gloves.

Use these funds according to the instructions. However, most of them have a general algorithm for performing the procedure.

1. Process the toilet with the necessary dose of the chemical.
2. Wait for the tool to work while.
3. Wash off in the toilet with the help of the drain system.
4. If necessary, repeat the procedure.

It is worth noting that the tools for cleaning pipes are made on the basis of alkaline compounds. Such a composition is not dangerous for cast -iron or plastic pipes. But if you have steel pipes, you should think 100 times before applying chemistry to clean the sewer system.

How to clean the toilet from Zasors with a plumbing cable

It happens that the toilet is clogged, and the water does not leave it. In this case, the chemical compounds will be useless, since they simply will not reach the place of the blockage, but dissolve in the upper layer of water. If the toilet is clogged with paper, rags, ropes or other items that accidentally or intentionally fell into a plumbing agent, they need to be removed. A special cable will help to cope with this task. This device has the form of a long spiral wire of at least 5 mm in diameter.

How to clean the blockage with a plumbing cable.

1. The cable is carefully inserted into the drain hole.
2. Carefully push the cable inside, simultaneously rotating the handle at the end of the device.
3. As soon as the cable rises into the blockage, scroll it several times.
4. Gently remove the cable. It is likely that a rag, napkins or a paper lump are hooked by the cable spiral, and you can take them out.
5. If the blockage could not be pulled out, you need to put the cable into the pipe again.
6. As soon as the device rests into the blockage, you need to continue to carefully push the accumulated waste.
7. As soon as the traffic jam passes the riser, remove the cable.

The pipe of the riser is much thicker in diameter than household, so the traffic jam freely passes through the system and enters the general sewer.

After cleaning the blockage with a cable, we also recommend using chemistry to clean the pipes. This will help dissolve small accumulations that lingered in the pipe after mechanical cleaning.

The toilet pipe clogged: a hydraulic method of cleaning

If you have a toilet to the toilet with a cat filler, sand or similar organic particles, we recommend using a hydraulic method of cleaning the pipe. The essence of this method is that the blockage is blurred by a stream of hot water. It is worth noting that this method is not suitable if your water does not pass at all or the toilet is filled to the top. Otherwise, you run the risk of pouring water by the sides and flood the bathroom.

How to clean the toilet with a hydraulic method:

1. Gently introduce a special hose into the drain hole of the toilet.
2. Connect the other end of the hose to the tap.
3. Turn on hot water. The flow of water must be adjusted independently, starting with a thin stream.
4. When the blockage is blocked, and the water begins to quickly go into the sewer, block the water.
5. Generally get the hose.
6. Rinse water in the toilet.

To improve the effect after hydraulic cleaning, it is also recommended to use chemical solvents for the toilet.

If you did not have a hose, you can try to “wash” the blockage without it. To supply water to the drain system, you can use a tank or a bucket.

How to remove the blockage with a hydraulic method without a hose.

1. Take hot water into a bucket.
2. Gently, on the sides from different sides, pour water into the toilet. Pour water with powerful jerks in several approaches.
3. Pour into the toilet, adhering to the above recommendation, 5-10 buckets of water.

How to clean the blockage in the toilet with a vantuz

Vantuz is the most elementary, but fairly effective plumbing device. This device can be found in almost every house. Thanks to the formation of a vacuum in the working cavity of a vantuse, this method affects the drainage system quite strongly and perfectly removes traffic jams and blocks of mild and moderate degree.

It is worth noting that the cable cannot be used “for dry”. If there is no water in the drainage hole, we advise you to pour a little liquid. Water will provide a better clutch of a plunger with the walls of the toilet and increase the effectiveness of the method.

How to clean the toilet with a vantuz:

1. Place the working area of \u200b\u200bthe vantuse in the toilet.
2. Speake a vacuum suction cup with a drain hole.
3. Press the vantusa on the handle of the vantuza to the handle and down on the handle.
4. When the blockage passes through the system, disconnect the plunger from the toilet.
5. Rinse the toilet.

For an improved effect, after cleaning the blockage with a batuse, use the appropriate chemical.

Cleaning the toilet with a plastic bottle

Cleaning the toilet with a plastic bottle is a primitive method, but quite effective. The essence of the method is that a vacuum forms in the toilet drain system, which pushes the blockage into a common riser.

How to clean the toilet with a plastic bottle:

1. Prepare a bottle with a volume of 1.5-2.5 liters.
2. Cut the bottom with a sharp knife, tighten the lid on the bottle.
3. Dear the bottle in the toilet so that the bottom enters the bowl as deep as possible.
4. Make a few rhythmic shocks down.

After using the method, pour a toilet with a chemical tool for cleaning pipes to enhance the effect.

The toilet was clogged: where to call

If you tried to clean the blockage in the toilet yourself, but the expected improvements have not appeared, one thing remains - to call a specialist. It is not recommended to be hard to do too, since the problem can be in the general riser, and your actions will only aggravate the situation. Where to call plumbing to call? You need to contact the organization that serves the house. You can also call private plumbing, which will take care of your problem in private.

If the toilet tank is clogged, you should not independently take measures to clean it. The fact is that the design of the tank is very fragile, and it is quite difficult to determine the exact place in the tank. For example, water in a tank may not enter due to the accumulation of lime plaque in a water pipe. In this case, only replacing the corresponding system will help. Only a qualified plumber can cope with this. You can call it by contacting the HOA or another service service.