Do -it -yourself hair jewelry. How to make hair jewelry. How to make original hair jewelry with your own hands. Creative ideas, master class.

Well -groomed hair at all times was the subject of female pride. To decorate the hairstyle and make the image of any representative of the female more expressive will help hair decorations. Such accessories can be used both for evening styling and for everyday hairstyles. Handmade jewelry, giving a special highlight of the image, is often expensive. Nevertheless, armed with desire and fantasy, most of them are easy to make without much difficulty on their own.

Content

DIY hair decorations: Advantages of using such accessories

It is no secret that one of the main jewelry of a woman is hair. Regardless of their length, any girl seeks to make her image harmonious. Graceful and original accessories that fix the hairstyle and decorate it help to look feminine. Stylish hair jewelry gives the opportunity to feel more attractive and confident - and in response the world around is also changing, offering new opportunities.

Give the originality of the simplest hairstyle, making it more vivid and festive, you can, using a variety of jewelry - hair clips, rims and scallops. A kaleidoscope of multi -colored beads, lace, ribbons and colors will help create an expressive and stylish image. A hairstyle decorated with original hair accessories made independently will not go unnoticed. It is not difficult to make hair jewelry with your own hands - you will need a little free time, as well as accessories purchased in the departments of goods for needlework. In the presence of imagination, you can also use improvised materials - in almost every house there is something that is suitable for the manufacture of future handmade masterpieces. Elements of jewelry can be pieces of dense fabric and lace, feathers, multi -colored beads, ribbons, wire, standard rims and hairpins made of metal and plastic.

DIY hair jewelry in the form of a flower

A large flower of many petals as a jewelry for hairstyles looks very feminine, like several small decorative flowers collected together. Such hair jewelry with flowers in the form of hairpins, hoop, elastic bands can be made independently.

DIY hair jewelry: hair clip with a flower

A chic fluffy chiffon flower is easy to make with your own hands. For this, the following materials and tools may be needed:

thin fabric made of artificial silk like chiffon;
needle with threads;
adhesive composition (it is convenient to use point glue or in the form of a pistol);
large bead or beads for the middle of the flower;
a piece of felt;
scissors;
small candle.

For the manufacture of such hair decorations with your own hands, you need to do the following sequence of work:

first draw 5-6 circles of various sizes on thick paper or cardboard. Start with the smallest and gradually increase the circles - it is required that the largest of them reaches about 6 cm in diameter. It is not necessary to seek perfectly even circles - on the contrary, an uneven circle will subsequently give the flower petals a greater naturalness and increase its similarity with a living flower;
cut the templates from paper and attach them to the fabric. Next, you need to circle each template with a pencil and cut it out of silk. At the same time, as in the previous stage, it is not required to observe the perfect roundness;
on blanks made of fabric, it is necessary to make small cuts evenly in a circle for the formation of petals. Their tips can be slightly rounded, cutting along the edges with scissors;
next, it is required to act carefully, consistently bringing the workpiece to the lighted candle to melt the edges of the petals. Place the fabric at a distance no closer than 3 cm from the fire - otherwise the silk will melt, in addition, there is a risk of burning your fingers. Rotate the workpiece, giving each petal the desired decorative shape;
fold together the layers of the flower from the largest to the small, fasten them in the central part using a needle with threads, or fix the structural elements with glue;
in the center, secure the bead or artificial pearls, if desired, you can also form a flower middle of beads;
on the back of the flower, it is necessary to fix a small piece of felt, to which in the future it will be necessary to glue the hairpin-and-beam. In addition, you can sew a flower to a hair gum suitable in color.

Such an exclusive jewelry for long hair will give the hairstyle brightness and originality. Do -it -yourself such hairpin will be a great gift for mom, sister or girlfriend. The flower on the hair will emphasize the beauty of the owner of the hairstyle and attract admiring glances to her.

DIY hair jewelry: rims with ribbons and beads

Plastic, rubber or metal hoop will help remove naughty strands on behalf of naughty strands and fix the hairstyle. The rims decorated with flowers look very feminine. The hoops decorated with an elegant brooch, beads and rhinestones, as well as a bow made of satin, chiffon or lace, also look very impressive. To make such elegant hair jewelry with your own hands is not at all as difficult as it might seem at the beginning. As an example, we will get acquainted with the master class manufacturing hair jewelry in the form of a rim with beads.

DIY hair jewelry: Master class on the manufacture of a rim

To make such a hair decoration from ribbons and beads on our own, we will need:

ordinary plastic rim (better wide);
hypyur tape 5 mm wide - 4 m;
glue (it is better to use a transparent composition);
lace tape 10 mm wide - 1.5 m;
small diameter beads (you can use ready -made beads);
scissors;
a needle with a thread.

Having prepared the necessary materials, you can start work. To decorate the rim, you need to do the following sequence of actions:

Cut small pieces of lace and glue them to the corners of the hoop so that they look neat.
Having fixed a strip of lace from one edge of the product, we sequentially wrap it around the hoop.
Cut the excess lace, leaving the tips about 10 mm long. Tour them on the back of the rim and glue them.
Next, you need to weave a volumetric braid from a guipure ribbon. Having cut off 1 m of the tape, we put off this segment - a flower will be formed from it later. The remaining 3 m must be weaved as follows:

tie a bow and, pulling at one end of the tape, dissolve one of its sides. In the remaining loop, you should draw a loop formed from the end of the ribbon, and then tighten its second end, which we hold in the hand;
after that, you should form a loop from the other side and put it in the previous loop.

In this way, it is required to weave a braid according to the length of the rim.

Next, you should spille the same pigtail from the remaining segment of the tape 1 m long. To collect a flower from the resulting braid, you should flash it along the edge with a point seam and tighten the thread. After that, cut the ends of the ribbon and sew a bead in the center of the flower.
We glue a long braid from the tape to the rim over the lace. Next, you should wait for 15-20 minutes, while the glue grabs qualitatively.
We string the beads on a single thread. It is convenient to use ready -made beads, for example, from medium -sized artificial pearls. Glue the thread with beads on the rim in the center of the braid.
Next, in the selected place to the fabric of the lace, sew or glue the prepared flower.

Such jewelry for hair from beads and lace looks fashionable and stylish and suitable for both little fashionistas and adults of young ladies.

DIY wedding jewelry

When planning such a solemn event as a wedding, it is very important to choose a suitable dress and related accessories. On this day, every bride seeks to feel more than ever and look especially luxurious. If desired, it is not necessary to put on a traditional veil at all, you can give preference to a lighter, stylish and elegant wedding jewelry for hair.

In the bride’s hairstyle, various hairpins and rims with living and artificial colors look great, giving a special romance. Unusual features in retro-style feathers look especially spectacular and stylish. Light diadems or thiars framing a high hairstyle, as well as hair accessories in the form of clamps and scallops, satin ribbons decorated with beads and rhinestones, emphasize the solemnity of the moment and are perfect for festive styling. It is worth considering that there should not be too many accessories, otherwise they can overload the image, overshadowing the beauty of the bride.

DIY hair jewelry: Wedding veil

Velets are significant among modern brides - such a feminine decoration in a vintage style is easy to make with your own hands. To do this, you will need a wool-wool size of 60x45 cm, as well as the hoop of a suitable shape or a comb, with which it is planned to fix this jewelry on the hair.

Having cut out the base from the grid in the form of a trapezoid, it is necessary to flash it with a point seam and pull the thread to collect a veil in the form of a not too thick fan. The grid should be sewn to a strip of felt. This design will need to be attached (glue) to the base in the form of a crest or hoop. Such a veil can be decorated with a flower, a satin bow, feathers or brooch.

DIY wedding decoration with your own hands from a living flower

Festive styling for a special case will perfectly complement the hair decoration in the form of a living flower. To do this, white Gardenia, open roses, as well as orchids of various colors are best suited.

In addition, you can choose delicate flowers like lysianthus or buttercup. It is recommended to use a fully open bud of a not too convex shape, which will look good, adjacent to the hair.

To arrange a living flower in the form of a wedding jewelry for hair, you will need to prepare flower tapes (they are sold in flower shops and in the parts of goods for needlewomen), as well as wire (floral or beads).

Next, you will need to perform the following sequence of actions:

pierce the stalk of the flower at the base with a needle and stretch through the resulting hole the wire. Cut it, leaving the ends about 15-20 cm long;
wrap the wire several times around the stem and twist its ends together along the entire length to in this way lengthen the cut leg of the flower;
wrap the barrel at the base of the flower and the wire along the entire length with a flower tape, cut the excess tape;
form from the tip of the manufactured “flower leg” a loop with a shape suitable for fixing the flower with invisibles or studs in a wedding hairstyle.

It should be noted that when creating a festive styling, it will be necessary to avoid varnish on a living flower, fixed in strands.

DIY hair jewelry made of hairpins and wire

Having designed several studs with beads and wire, it is easy to make spectacular accessories for various hairstyles. For this, in addition to the actually studs, we need a wire with a thickness of 0.4 mm, beads (transparent crystals, as well as artificial pearls), as well as bites and round -liners are suitable.

To make hair wire -based wire decorations, you will need to perform the following sequence of actions:

First, it is necessary to cut off 40 cm of wire and wrap the tip of the segment several times around the base of the stiletto.
The bead should be put on the long end of the wire. Fix it at a distance of a few centimeters from the base of the hairpin, dangling the wire in the opposite direction.
Next, you should twist the “legs” of beads together.
Wrap the wire around the base of the hairpin to divide the “branches” of the structure.
Cut another piece of wire and repeat items 1-2, fixing it along with beads on the previously manufactured branch.
Further, it will be necessary to fix a couple more branches with beads on the basis of the hairpin.

The result is a kind of decorative tree. To make such a wire hair decoration, you can also use colored beads and crystals from semiprecious stones.

Having selected to your liking shades of decor and correcting the placement of branches, you will get an original and exclusive accessory. Such a decoration will be a great addition to various hairstyles.