How to clean the fur at home

For many centuries, fur products have been warming a person from the cold. In the ancient centuries, people wore exclusively clothes from the skins of killed animals. Ladies from the Higher estate in the Middle Ages preferred to wear fur products from mink, fox, martens and ermine, which not only warmed them in a winter cold, but also betrayed them a charming charm and sophistication. The middle class was content with products from a hare, fox, beaver.   Today, along with clothes and accessories made of natural fur, there are many beautiful analogues of artificial fur. But no matter what fur is decorated with your image, you should know the main thing - you cannot do without good care and cleaning.

How to clean the fur at home

How to clean natural and artificial white fur from pollution

For cleaning white (dark) natural and artificial fur, it is recommended to purchase a shampoo for pets. Dilute such a shampoo in a basin with warm water, dip a clean tissue into the liquid, squeeze it. Process the fur with the resulting solution in the direction of the pile growth line. After cleaning, get wet with a cotton towel, hang the product to dry on the hanger. When the fur finally dries, comb it with a brush and shake it several times.

Wood sawdust impregnated with gasoline helps to clean the white fur. In any pet store, purchase sawdust from hard -faced breeds, needles are best suited, pour them with a small amount of gasoline, let it soak well. Next, distribute the sawdust evenly along the fur product, rubbing the mixture of sawdust with your hands, leave it until the final drying. Then clean the fur from sawdust, comb it and shake it.

Clean white fur with an old proven agent - an alcohol solution with soda. To remove dust and dirt from white fur, you will need to mix food soda with medical alcohol in proportions 1: 3. We wet the foam sponge in the solution and clean the fur in the direction of pile growth.

How to clean natural and artificial white fur from yellowness

A 3% solution of hydrogen peroxide solution will help to return white fur. It must be diluted in equal proportions with water. Pour the finished mixture into a spray gun (sprayer) and spray along the fur. We leave it to dry at room temperature, away from the heater, the fireplace and batteries. After drying, the fur should be thoroughly combed with a comb with small bristles, shake. If white fur is only part of the product, you need to be particularly careful during the spraying of a means of peroxide. To protect the fabric or skin, cover it with a film, leaving only the fur part for processing, otherwise spots or stains can remain on the fabric or skin, and the color material will completely lose its color.

Potato starch, semolina or wheat flour also helps to cope with yellowness on white fur products. Such products will probably be found in the arsenal of every housewife. To achieve the best effect of starch, flour or semolina should be previously warmed up in a dry pan, hot to a temperature of 70 ° C. It is very important that the powder does not burn, otherwise your white fur product can be stained during cleaning. Warm starch, flour or semolina pour into a white fur, rubbing the powder, as with manual washing. After several minutes of intense rubbing, shaking off the “dry powder” from the fur villi and comb the fur with a brush.

Did the white color fade and became yellow as a result of pollution? The composition of potato starch, burned magnesia and purified gasoline will help to cope with this problem. All these components should be mixed until the consistency of the gruel and applied with a sponge against pile growth. We leave the fur product until completely dry, then shake it from the remnants of the cleaning composition and comb the fur with a brush with rare teeth.

How to clean dark natural fur

Convenient, and most importantly, inexpensive way to clean natural dark fur will be a solution of salt and ammonia, which should be mixed in proportions 1: 3. We dip a cotton pad or brush into the resulting solution and wipe it with the contaminated furs of the fur. After cleaning, we wait for drying and comb the pile.

For cleaning dark natural fur, it is also recommended to use warmed sand. It should be thoroughly rubbed into the fur product. After cleaning, the sand is shaken from the fur and, if necessary, repeat the procedure.

How to clean the fur, rabbit, mink and black -bold from pollution and fat spots

Rye and wheat bran perfectly help to clean the fur from pollution at home. They should be slightly warm in a dry pan, not forgetting to constantly mix so that the bran is not buried. Evenly distribute hot bran along the fur, clean it with a soft brush. After thorough cleaning, cut off the bran, comb the pile. Such a tool will help you delicately clear the fur without spoiling its appearance.

Do not forget about vinegar, which effectively cleans fur products. For such cleaning, it is recommended to dilute 1 tbsp. Associate essence in 200 ml of warm water. In the resulting solution, moisten clean cloth, and preferably a microfiber napkin, squeeze it. We process the fur with vinegar solution and leave the product dry at room temperature. After completely drying, comb the fur with a comb with rare teeth. When using this method, you should ensure that the leather lining does not get wet. Otherwise, the fur product can become hard and lose its attractive appearance.

Aviation gasoline helps to get rid of fat and cosmetics on fur. To carry out such cleaning, moisten the foam sponge in a small amount of gasoline and treat polluted areas of fur. Let the gasoline dry a little, and then rub potato starch in the fur, leave it for 15 minutes. At the end of the cleaning, shake the fur, sprinkle clothes.

Fat areas on the fur also helps eliminate an ammonia solution with salt. To prepare it, mix 3 tsp. salt, 1 tsp ammonia and 0.5 l of water. The resulting solution should be treated with fat areas of fur with a cotton swab or clean tissue. After drying, the fur must be combed.

All these products can also be used to clean artificial fur, except for a means using vinegar, since acetic acid can spoil the product of artificial fur.

The above cleaning methods for natural and artificial white fur are also effectively used in cleaning fur products made of mink, rabbit, arctic fox and black fox.

How to clean black -bolder fur from yellowness

If the black -fiber fur has turned yellow, do not be upset and throw your favorite fur coat. Use the well -known and proven eyelids against yellowness.

The most reliable and safe way to restore the black -burgla of the former shine and the original appearance is considered chalk, gently whitening the fur products. It is very simple to get rid of yellowness, for this, rub the piece of chalk into powder and thoroughly rub it into a fur product. After a few minutes, dry washing with chalk, shake it off the fur. Believe me, the result will surpass all expectations, and your Chernoburka will again become like new.

Starch in combination with soapy solution is no less effective in the fight against yellowness on a fur. Potato starch should be applied in dry form on the yellow areas of the black fox, rub well, and then spray the soap solution on top of the starch powder using a spray gun. Let the fur product dry. Using the brush, remove the remnants of the product after drying. If necessary, such a procedure can be repeated several times.

In addition to whitening, you can also tint the fur using blue for these purposes. Such a tool used to be often used during the washing of linen, and now the time has come to “wash” her and black -bitch. For use, dissolve a small amount of blue in warm water so that the solution acquires a light blue tint. Moisten the clean fabric in the resulting solution and treat the fur areas with yellowness. Let the fur dry out and comb it. After such cleaning, the blackburn will shine again.

You can also supplement these proposed methods for combating yellowness of black -bolder.

How to clean the fur on boots

How to clean white fur on boots

For cleaning white fur on boots, it is recommended to use products that would not give it yellowness.

Ideal for such purposes is starch, wheat flour or talc. We sprinkle the fur densely with any remedy you selected, rub it thoroughly, and after a few minutes we shake it off.

No less effective for cleaning white fur on baking soda boots. It should be rubbed with your hands in the fur until Soda acquires a gray tint. Then you just need to shake soda. This method is ideal not only from getting rid of dust and pollution, but also from breeding fat spots on a white fur.

The purified gasoline is ideal for eliminating spots from paint, which most often appear due to close contact of white fur on boots with jeans or colored trousers. To get rid of such spots, you should moisten the fabric in gasoline and thoroughly wipe the areas with pollution.

How to clean dark fur on boots

If there is a dark fur on your boots, then you should exclude options for cleaning flour, starch, which are very effectively fighting pollution on white fur.

Small sawdust helps best for cleaning dark fur on boots. They are able to eliminate spots and pollution even on the seams and lapels. Sprinking sawdust must be slightly moistened with water and attached to places with contaminants. A couple of hours after drying, we shake the sawdust from the dark fur and comb it.

To remove spots, gasoline can also be used, but you should be very careful here, since if you overexpose, you can not only clean the fur from fat pollution, but also discolor it.

How to clean white fur. Video