How to make a paper mask with your own hands. Masks on the head from paper - templates, diagrams. How to make a volume mask of paper

New Year holidays are always accompanied by costumed matinees or masquerades, which include not only the preparation of a suitable costume, but also the creation of an original and beautiful carnival mask. This item and detail of the costume are not necessary to buy, it is enough to show your imagination and creative vein, and you yourself can make a mask of paper with your own hands.

The creation of masks for children on the matinee will become a very exciting and interesting process where you can spend time with your child and make a pleasant addition to the carnival costume. A paper mask can be made for your own corporate evening, if its theme is a masquerade. In this case, you can try to realize bright and very unusual Venetian masks.

Therefore, in this article, we will consider in more detail the features of the manufacture of a mask on the head from paper, as well as note the characteristics of their main types. We give detailed step-by-step instructions and master classes on the manufacture of paper masks with your own hands.

Features of the creation of paper masks with your own hands

The carnival mask can be both part of the main masquerade costume, or an independent accessory that will certainly make your image or image of the child more festive and mysterious. Such a seemingly simple object can, beyond recognition, change the appearance of a person and make any holiday really fun. The history of the appearance of masks is very long and rich in various events. Even in ancient Rome and Greece, it was popular to use masks at various events. We can also say about France, where royal families loved to arrange masquerade balls. In this case, the masks were made of the most expensive materials. Do not forget about the Venetian masks, which are the brightest and most popular. Any tourist traveling in Italy will certainly want to bring such a mask in the form of a souvenir.

Undoubtedly, in any store of your settlement you can find a variety of masks that will easily complement your child’s carnival costume or your own. However, it is much more interesting and more exciting to make a mask with your own hands together with the child. At the same time, it is enough to use only paper, despite the fact that in the end you can get a very beautiful and unusual accessory.

Features and rules of how to make a paper mask with your own hands:

• First of all, it is necessary to remember that there are several types of paper masks that differ in methods and manufacturing techniques. The most popular are the following types of masks: flat paper masks, voluminous, paper masks on a hoop and masks from papier-mash. The simplest ones in execution are flat masks, for the manufacture of which you just need to cut out the finished template. Usually such masks are made with young children. More complicated in execution are volumetric masks of paper to make which you need to prepare the fasteners and glue them. Masks from papier-meshe look more beautiful and original and under the power of older children. Simple and understandable types include masks of paper on a hoop. To do this, it is enough to glue any mask on the existing hoop.
• In addition to the above types of paper masks, carnival masks made in the technique of origami can be noted. To make such a festive accessory, it is necessary to carefully study the origami technique and carefully perform each step in making the mask.
• Before you make a paper mask, you need to prepare all the materials for this process. Most often, ordinary thick paper is used, it is best to take colored. To make the mask more durable and serve longer, the prepared mask template is recommended to glue on the cardboard. Also in the manufacture you will need a tape for tying and various decoration elements.
• To make the mask neat and beautiful, it is important to clearly observe all the stages of its manufacture. First of all, it is necessary to remember the removal of measures, since the mask is a child or you will wear on your face for a while, so it should clearly correspond to the location of your eyes. Using a measured tape or ruler, measure the distance from the center of one eye to the middle of the other in a straight line. After that, it is also necessary to measure the distance from the left temple to the right.

• All sizes are transferred to the template. Next, the remaining details of the future mask are drawn. Its edges can be either rounded or elongated, or pointed and straight. Eye holes are made depending on the type of mask. Venetian masks are characterized by slightly slanting eyes, and in animal masks it is better to make round slots for the eyes. If you make a mask of paper half a face, you must remember that its lower edge should not completely close your nose.
• Decorating a mask of paper is a very creative and cheerful process that will appeal not only to the child, but to the adult. As a decoration of a festive accessory, you can use felt -tip pens or paints, sparkles and rhinestones, feathers and ribbons. The mask itself can be attached to a beautiful hoop or a small stick.

As can be seen from the listed features of the manufacture of paper masks, this process is not at all complicated, but rather fascinating and interesting. Indeed, with the help of such a craft, you can completely change the entire image of your child and make his festive suit more original and unusual. Masks for children from paper are not only the creation of an accessory for a masquerade costume, but also a time jointly with him.

Paper animals masks-detailed workshop workshops

Animal masks are the most popular accessory for a festive matinee in kindergarten. It is at this age that children most often dress in costumes of bunnies, bears or cats. Therefore, it is important for every mother to know how to make the simplest animal mask. Consider several detailed master classes in the manufacture of flat masks of animals from paper.

Paper cat mask - step -by -step description

To make such a cute mask of a cat of paper, you will need the following materials:

• Thirty paper of three colors: white, pink and black. You can use the cardboard of the same colors - so the mask will turn out to be more durable and will last much longer.
• Simple pencil.
• Glue or double -sided tape.
• Gum or tape.
• Scissors.

Description of the manufacture of masks:

• First of all, it is necessary to remove the size of your child's face. To do this, with the help of a measured tape, measure the distance from the center of one eye to the center of the other, as well as from one temple to another. After that, using these parameters, draw a cat's muzzle template on ordinary white paper. The pattern of the future mask can also be printed on a printer from the Internet and apply the size of the child’s face.
• Next, attach the template to the sheet or cardboard of black paper and circle with a simple pencil, and then carefully cut the mask preparation.

• Next, on a white sheet of paper or cardboard, draw a cat and a muzzle by the hands of the middle of the ears of the cat. Cut these parts with scissors.

• After that, small thin strips for a mustache need to be cut out of the same white paper. Draw and cut a small nose out of pink paper. Glue all these elements to the cat's muzzle.
• Next, using the child’s face with the standards of the face, draw the contours of the future eyes of the mask and cut them using scissors. In this case, you can use a clerical knife.

• After that, you need to make small holes on the sides of the mask in the temple area and draw an elastic band or a tape in them. The cat mask is ready.

DIY Bear Mask - Simple Instruction

Very often on children's matinees you can see the costumes of bears, for which you can also make an unusual mask of paper with your own hands. We give a detailed step -by -step instructions for making a simple bear mask.

Necessary materials:

• Dense sheets of paper or cardboard brown and yellow.
• Simple pencil, scissors, stationery knife.
• PVA glue.
• Gum or tape.

Mask manufacturing process:

• You can print a finished muzzle of a bear from the Internet from the Internet, on the basis of which you will make a carnival mask in the future. As an option, the contours of the mask can be immediately drawn by hand on a white sheet of paper, making a notch for the nose. After that, cut the template and with its help the image of the mask is transferred to a brown cardboard.
• Cut the mask with scissors.

• Next, you need to remove the measurements from your child's face. To do this, mark the distance from the center of one eye to the other with a measured tape. Transfer these parameters to the mask, after which, with the help of a simple pencil, gently draw the contours of the eyes. For a bear mask, it is best to make them large and oval.
• Cut your eyes with a clerical knife.

• After that, you can start decorating a bear mask. First of all, on a sheet of yellow paper, cut the circles that must be glued in the middle of the ears. From the same sheet of paper, you need to cut the lower part of the bear's muzzle. To do this, attach a mask to a sheet of paper and draw the lower face of the muzzle. The upper part must be drawn by hand. Glue all the elements.

• From a black sheet of paper, cut a triangle with rounded ends for a nose of a bear, glue it in the center of the muzzle.
• Next, so that the mask is completely ready, you need to choose the right tie. In this case, you can use the usual black ribbon or an elastic band. It can be glued on both sides from the reverse side or put into pre -prepared holes.
• The bear's mask is ready.

Paper Hare Mask

The most popular New Year's costume for children is a bunny costume. That is why many mothers often seek detailed instructions for creating a mask for such a character. Consider an interesting master class of manufacturing a mask of a paper hare.

The necessary materials and tools:

• White cardboard or thick paper is white.
• White cotton wool.
• Napkins of different colors (pink and blue). You can use corrugated paper.
• Simple pencil, black felt -tip pen.
• Scissors, stationery knife.
• PVA glue.

Creation process:

• First of all, it is necessary to draw a muzzle of a hare with large ears. You need to draw to the tip of the nose. If you doubt your artistic talent, then the finished template of the mask of this animal can be printed from the Internet. Cut the resulting workpiece.
• After that, measure in the child the distance from the center of one eye to the center of the other and transfer the resulting size to the mask. Draw the contours of the eyes and cut them out with a stationery knife.

• After that, take the napkins and break them into small pieces, which later need to be rolled into balls. Take glue and glue pink paper balls in the center of large ears, and blue balls are on the top of the bunny head. Try to add a little glue so that it does not flow.

• The remaining parts of the muzzle must be decorated with white cotton wool, which is glued with glue.
• Next, draw the contours of the eye of the bunny and eyelashes with a black felt -tip pen.
• As ties, you can use a tape or elastic band. As an option, such a mask can be glued to the hoop.

Paper Frog Mask - Description

Consider how easy it is to make a mask of frog from paper on a hoop.

Necessary materials:

• Green thick paper. You can use ordinary white paper or cardboard, which will be painted in the future with green gouache.
• Scissors, stationery knife.
• Glue.

The process of creating a mask:

• For such a mask, the template can be drawn by hand, or you can cut any frog muzzle from old children's books you like. You can also use the Internet where a large number of paper masks are presented, which is enough to cut, color and glue it.

• Prepare the frog muzzle template and cut it with scissors.
• Next, cut a wide strip from the same sheet of green paper, which would completely wrap the baby's head and hold tightly on it.
• With the help of glue, glue the paper-explosion to the mask.
• The frog mask is ready.

Volumetric paper masks-step-by-step master classes

Above the instructions of creating simple flat paper masks that even a child with your help could make. Next, we will try to figure out how to make more complex volumetric masks that have a more realistic appearance.

Volumetric mask of a cat of paper - phased instruction

To make such a bright and unusual cat mask, the following materials will be needed:

• White paper is white or cardboard.
• Simple pencil, paints.
• Scissors, stapler, stationery knife, tape.
• PVA glue.
• Fields, tape, decorative elements.

Description:

• You can find on the Internet, already ready -made templates with shakes that are enough to print and cut. However, in the absence of such an option, you can try to do everything yourself from the first to the last step.
• You will need half of the album sheet or A5 sheet. Fold it twice along and across.
• From the intersection of the two folds, it is necessary to retreat about 1.5-2 cm in each direction and cut the eyes of the cat. The diameter of the eyes should be approximately 4-4.5 cm. The exact distance between the eyes can be measured on the child’s face, and then marked on the mask template.
• After that, you need to engage in the steps. To do this, make cuts in the temple area, above the eyebrows and below the width of the nose.

• Once again, bend the workpiece on the long side and make a small pin 2 mm with your hands between the eye holes from the inside of the stapler. Hacks on the forehead bring about 0.5 cm and glue.

• Next, dilute carefully the cuts on the temples and stick small triangular pieces of paper into them. It is in this place that the ends of the ties will be recorded in the future.

• The edges of the sections in the lower part are drawn to the center, as shown in the figure and glue. At the same stage, it is necessary to cut and attach triangular ears. Using a fishing line, make a mustache and fix it with tape on the back.
• Next, you can paint the mask black and decorate along the edge with beautiful braid and rhinestones.

Simple volumetric mask of paper foxes

There is a simpler way to create a voluminous paper mask. In this case, it is enough to find a suitable template on the Internet and print it.

Necessary materials:

• Printed template of the fox mask.
• Scissors, stationery knife.
• PVA glue, tape.
• Tape or braid for ties.

Production process:

• First of all, on the Internet, you need to download and print a template for a voluminous mask of fox with shakes. Then cut it with scissors.
• Next, cut the template in the marked places where there should be stitching.
• Glue the edges of the cuts with glue to the width of the specified edge.

• Next, cut the ears of the fox separately, bend along the dashed line and glue it. Also cut the thin strips of yellow paper and glue the mustache from the back of the mask with glue.
• Using a stationery knife, cut holes for the eyes. With tape, glue the ends of the elastic band or tape on both sides of the mask.
• The fox mask is ready.

Paper Wolf Mask - Detailed Description

A beautiful volumetric mask of a wolf can be made from several parts that will be mounted on a paper hoop.

First you need to print and cut out the finished templates:

• The indicated templates must be cut, and then glue all the parts along the indicated lines.
• Further, all elements are connected. If desired, you can paint the wolf mask with paints.

Papier-mash paper masks-manufacturing instructions

To make a beautiful and realistic mask, you can use the technique of papier-mash, which consists in gluing pieces of the newspaper one on one using a large amount of glue. After drying, you will get a real cast of your face. At the same time, you can use several options: stick on the face, on the balloon, on the cast of foil. Consider the option of making masks from papier-mash.

Mask of a person from paper using papier-mash technique

To make the face mask from the paper, it is necessary to clearly observe the contours of the real face of a person. To do this, you need to apply paper on your own face or mannequin, or you can use foil. Consider the second option.

• First of all, cut about 8-10 sheets of aluminum foil, the size of which should be slightly larger than your face. Fold these sheets one on one and attach to your face, and then strongly press over the entire surface. The foil should fit tightly to your eyes, nose, lips, on the sides of the head.

• Without removing foil from your face, mark your eyes.
• Next, take the old scissors and carefully cut the mask along the edge and cut the openings for the eyes. Do not forget to make slots for huts in the area of \u200b\u200bthe forehead and on the chin.

• After that, take the tape and swing all the edges, including in the eye area. Glue the edges of the slots so that the mask takes a voluminous shape.
• At the next stage, it is necessary to proceed directly to the papier-masha. To do this, prepare the adhesive composition of equal parts of PVA and water glue. It is also necessary to cut old newspapers into thin strips. Gently dip the pieces of newspapers in the solution and apply on the base of the mask. This must be done very carefully so as not to damage. Put the first two layers and leave to dry for one hour.

• After that, apply the third layer of papier-masha. If you want to make the surface of the mask more smooth, you will need another 3 layers not from newspapers, but from paper towels.
• When the mask is completely dry, apply a layer of acrylic paint on it and let it dry.

• At the last stage, it is necessary to give the mask a festive appearance. It can be paint or various sparkles and rhinestones. Glue on the sides of the mask tape for fastening.
• The mask from papier-masha is ready.

According to this technology, you can make the basics of various masks and half masks that will help make very realistic images for carnival and masquerade holidays to both children and adults.

Paper superheroes masks

Today it is very popular for matinees and carnival events to dress up in your favorite heroes, among which there are most often all the favorite superheroes of American comics and films. This includes Spider-Man, Iron Man, Ninja Turtles or Lady Bug. It is not so difficult to make masks from paper of these heroes, the main thing is to choose the most suitable equipment for yourself. Consider several options for creating masks of superheroes with your own hands.

A mask of a person-spider of paper-a detailed description

To make a bright and spectacular mask of a spider of paper, you can simplify your task and just download one of the templates from the Internet, which is later cut and drawn up. You can draw a mask of this hero by hand using your own artistic fiction.

Necessary materials:

• A dense sheet of red paper.
• Scissors, stationery knife.
• PVA glue.
• Black marker.

Production description:

• First of all, we remove the measurements of the child. To do this, measure the distance from the center of one eye to the center of the other. In addition, it is important to know the distance in a straight line from the temple to the temple.
• Using the obtained dimensions, draw on a red sheet of paper a stem with a spider-man mask with a place for the baby's nose.
• Next, cut the basis of the future mask with scissors.

• In the marked places, draw the contours of the eye of the person of the bunch. It is important to remember that in a real hero they have the shape of a crescent, the ends of which are directed up.
•   Using a stationery knife, cut holes for the eyes.

• At the next stage, it is necessary to draw a drawing on a spider-man in the form of a web with a simple pencil with a simple pencil. After that, circle everything with a black marker. It is also necessary to highlight the contours of the eyes with the same marker.

• To fix the mask on the head, on both sides of it, glue an elastic band or tape with adhesive tape.

Exactly in the same technique you can make a mask of paper ninja. To do this, draw a similar shape of the head of a ninja turtle with oval eyes for the eyes and a bandage of a certain color, on which the name of the hero will depend.

Iron Mask from Paper

Iron man is also an idol of millions of modern adolescents and children, so you can often see carnival costumes in the form of this hero. To get such an accessory, you can make an origami mask of paper or a 3D mask, you can adhere to simpler techniques, for example, flat masks or papier-meshe. Next, we consider how to make a mask of this subperhero in a complex technique.

• Such a simply super -realistic mask of an iron person can be made using printed templates. However, in this case, you will have to work hard.
• First of all, on the printer, it is necessary to print a mask of paper, but not integral, but its smallest parts, as shown in the drawings.

• Next, it is necessary to carefully cut out all the details of the future whole mask of the hero. This can take a few days.
• At the next stage, all parts must be glued with PVA glue. At the same time, remember that not all parts are glued to each other, some are simply fixed with special openings.
• Let the mask dry completely.

• In order for the mask of an iron person to be more durable, it is recommended to cover it with one layer of epoxy resin, and then primed.
• And then it remains to apply red and gold paint and the real helmet of the superhero is ready.

You can deal with the technology of creating such a mask in more detail in the presented video:

Mask lady bug from paper

The easiest way is to make a lady bug of paper, which is also the heroine of one of the most popular cartoons of our time.

• It is necessary to prepare thick cardboard, red paper and black, or use red paper in black peas.
• First of all, it is necessary to draw or print the base of the base of the mask of Lady Bug.

• Using scissors, cut this workpiece. Next, prepare red paper, attach a template to it and circle the contour. Cut the mask.
• Stick a red mask on the draft option from cardboard. After that, it remains to cut and glue the black circles and fix the tape on both sides of the mask. Also, do not forget to draw beautiful eyelashes on the mask using a black marker.

The result was a very beautiful mask for a girl from paper.

Terrible paper masks-master classes

For more serious carnival holidays that adults arrange, you can prepare more non -standard costumes with the same original masks. In this regard, various heroes are also popular, but already from horror films.

Jason mask of paper - phased manufacturing

The main character of the film “Friday, 13th” Jason Wurchiz is considered the most striking character in this picture, so there is nothing surprising that his mask began to be used for the Halloween holiday. Consider how to make such a mask in the technique of papier-mash.

• To make the basis of Jason mask, you can use a balloon or your face, standing in front of the mirror.
• The shape of this mask is quite simple, with a slightly flattened nose and wide, superfluous arcs.
• Inflate the balloon and carefully lay out the first layer of the newspaper, abundantly moistened in adhesive solution. Do not be too lazy to apply more layers of papier-mache, since the original mask is quite thick.
• When the base of the mask completely dries, it can be covered with a primer and painted white.
• Next, it remains to decorate the Jason mask. To do this, you need to cut the eyes, and also using a drill drill holes in a certain order. Therefore, it is important to look at the real frames of the film to do everything right. Do not forget to draw red triangles, as shown in the photo.

Freddy's mask from paper - video

3d paper masks

Recently, 3D paper masks that are characterized by the accuracy of the transfer of parts, realism and increased complexity of manufacture have been especially popular. Unfortunately, paper masks templates in this technique can only be downloaded on a paid basis. Therefore, on the Internet, it is quite difficult to find detailed instructions for their manufacture. Here are a few visual pictures of 3D masks:

Below we give a video how to make a mask of a skull from paper using 3D technology with your own hands:

Using this video, a paper mask can try to make anyone, the main thing is to have patience, perseverance and a great desire to see the final result of all your works.